Short Descriptions of All Our Products
SUPER THERM - Blocks 96% of heat load on a wall or roof surface to reduce heat transfer into or out of a building. Single coat. Has saved up to 50% on total utility cost.
RUST GRIP - replaces three coat systems with one coat to encapsulate rust, bond and strengthen the surface to 7000psi and last 20+ years for bridges and structures. All DOT testing completed and on State product approval list. Has saved 60% on bridge maintenance and bridge repainting cost.
HPC - covers 100% of the hot pipe, boiler or furnace surfaces in any configurations with a spray-on coating that insulates to contain heat and improves efficiency of operation to save energy use. Eliminates wrap and jacketing that absorbs moisture and allows corrosion to develop. This is moisture tight and maintains dry conditions. Temperatures up to 900F.
HSC - same as HPC except smoother but only goes up to 350F.
MOIST METAL GRIP - stops corrosion over wet surfaces that cannot be dried out. Apply while wet and encapsulate the corrosion.
LINING KOTE - seals interior of acid or caustic tanks and pipes to protect from deterioration and corrosion development. Used mostly in Petrochemical plants.
ENAMO GRIP - applied as finish coat in any color or clear for architectural projects.
ENAMO GRIP 3700 - applied over existing painted surfaces in clear to give a easy removal of graffiti without blasting and repainting.
ENAMO GRIP 5000- Applied over vessels or areas where chemical, acid or caustic fumes, vapors or drips can deteriorate the exterior side of tanks, pipes and equipment while being UV controlled and gives a auto finish.
Roofing System - insulates, water proofs and seals.
OMEGA FIRE - can provide up to a 7 hour fire rating for steel, concrete or composite support beams and walls.